| Customization: | Available |
|---|---|
| Theory: | Pneumatic |
| Type: | Gas Sterilization Equipments |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Product forms | HTAJ3 manual door cabinet |
| Power source | AC380V,50Hz |
| Sterilizer size | (Length × width × height): 2600×1400×1400mm |
| Sterilizer volume | 3 m³ |
| Sterilizer interior material | 304 Anticorrosive stainless steel |
| Outer carton material | Carbon steel |
| Temperature during sterilization | 50ºC ±3ºC |
| Working pressure | -60kpa |
| Maximum anti-stress value | -150kpa |
| Humidity during sterilization | 45%-75% |
| Pressure sensor | The built-in pressure sensor automatically detects the pressure inside the cavity to ensure that the pressure in the cavity is accurate and effective. |
| Ethylene oxide sterilization concentration | 1g/L Adjustable |
| Leakage rate of sterilization chamber | The leakage rate is measured under the conditions of no-load and constant temperature in the sterilization chamber, the test pressure is -50kPa, and the measurement time is 1h. The average leakage rate within the measurement time is ≤0.16kPa / min. |
| Sterilization time | 0-99 hours Adjustable |
| Vacuum speed | 15-25 minutes to -60kpa |
| Air replacement | Automatic ventilation, ventilation times and interval time can be set freely |
| Automatic control system | One-key start to end, the whole process of automatic completion with printing records |
| Display status | Display temperature, humidity, pressure, sterilization time, residual gas treatment time, frequency |
Printer |
Record and print the sterilization information of the whole process for verification. |
| Humidity sensor | The built-in humidity sensor automatically detects the humidity in the cavity to ensure that the humidity in the cavity is not less than 45% RH. |
| Residual gas treatment device | The removal rate of the filter with a particle diameter ≥ 0.3 μm is not less than 99.5%. |
| Temperature sensor | The built-in temperature sensor automatically detects the temperature in the cavity to ensure that the temperature in the cavity is maintained within an accurate range of 50 ° C ± 3 ° C. |
| Humidification system | Pulse humidification under vacuum to ensure that the humidity in the cavity is uniform and controllable; the humidity in the sterilization chamber should be controlled within the range of relative humidity 45% -80%; |
| alarm system | High temperature alarm system, ultra-low pressure alarm system; When the sterilization temperature of sterilization chamber exceeds 59ºC, the alarm shall be audible. |
| Vacuum rate | Under no-load condition, the time for the sterilization cabinet to vacuum from atmospheric pressure to -60kpa should be ≤30min. |
| Vacuum system | The use of oil-free vacuum pump, simple and convenient, fast vacuum rate, long service life. |
| Multiple protection functions | With over - pressure and over - temperature protection function, more safe and reliable. |
| Heating system | Adopt explosion-proof electric heating device, more convenient and fast |
Technical characteristics
HTY series ethylene oxide sterilizer is purpose-built for low-temperature fumigation, achieving comprehensive sterilization within a controlled environment. The process involves precise regulation of temperature, pressure, humidity, and exposure time, using a blend of pure ethylene oxide, ensuring impeccable sterilization outcomes. ethylene oxide. Renowned for its potency, ethylene oxide gas is an exceptional chemical disinfectant. It offers broad-spectrum sterilization capabilities, delivering dependable and effective results with every use.
Advantages of ethylene oxide sterilizer
Effortless operation is at your fingertips with our ethylene oxide sterilizer. A single button initiates the process, managed by a microcomputer for ease and precision. The digital display provides real-time updates of the sterilization cycle, while a built-in printer records and prints detailed sterilization logs, offering easy verification and documentation. The sterilizer's air inlet features an advanced filtration system that effectively removes harmful microorganisms, preventing secondary contamination during air release.(1)Installation requirements of ethylene oxide sterilizer:
1) Position the ethylene oxide sterilizer in a spacious, well-ventilated area, distinctly separated from fire-prone zones.
2) Maintain a 51cm clearance around all sides and the top of the sterilizer to allow for unhindered access and maintenance.
3) Ensure the installation of dedicated exhaust pipes that are isolated from all other systems within the building to protect the integrity of the environment.
(2)Ethylene oxide safety protection principles and precautions:1) Position ethylene oxide sterilizers and containers prudently, ensuring they are distant from any ignition sources and static electricity. 2) Ethylene oxide storage must be devoid of ignition sources, free from rotating motors, shielded from sunlight, well-ventilated, and maintained at temperatures below 40 ºC, yet never placed in refrigerators. Adhere strictly to national regulations for managing flammable and explosive materials. 3) Handle bottles with care to prevent excessive force and avoid liquid spray. 4) Conduct annual monitoring of ethylene oxide air concentrations within the work environment. 5) Ensure staff handling ethylene oxide are expertly trained and equipped for emergency management.
company information
The Group is a beacon of innovation in the medical field, strategically gathering top-tier professionals and channeling robust technical expertise into research and development. Our significant investments have borne fruit, delivering groundbreaking advancements in ethylene oxide sterilizers. Through the integration of the cutting-edge 5G intelligent AI platform, we've revolutionized equipment operation, ensuring simplicity, safety, and superior sterilization performance that surpasses customer expectations. We uphold an unwavering commitment to high standards and responsibility in customer relations. Our corporate philosophy-prioritizing integrity before action-has fortified our position and propelled our growth within the medical device industry.
Our state-of-the-art equipment meets the rigorous standards of CE, ISO11135, and EN1422, ensuring versatility in sterilizing a vast array of products, including medical devices, healthcare facilities, plastic and disposable items, spices, traditional Chinese medicinal materials, cultural artifacts, and even currency. We invite you to reach out to us confidently for further information, as we are eager to assist you with your sterilization needs.
){kind=link}